Service description
Multi-tool equipment DomoBIO model 4A which combines different additive manufacturing technologies in the same part such as Fused Deposition Modeling based on 1.75 mm diameter filament, Fused Granular Fabrication based on pellet size between 2-4 mm, hydrogels extrusion or electro-spinning from polymer solutions.
The tooling heads allow the following materials to be produced:
- Standard thermoplastic polymers, standard thermoplastic-based composites and thermoplastic elastomers of hardness above 60A Shore hardness in 1.75 mm filament format.
- Standard thermoplastic polymers, standard thermoplastic-based composites and thermoplastic elastomers in a wide range of shore grades (shore 00 - shore D) in 0.5-5 mm pellet format
- Extrusion of hydrogels with maximum viscosity 200 Pa s
- Micrometric fibres by electrospinning with a maximum siringe volume of 3.5 or 10 ml
The characteristics of the equipment are:
- .stl file
- Extrusion temperature below 250ºC in filament or pellet extrusion
- Available nozzle diameter for filament or pellet: 0.2-1 mm
- Platform temperature from 5 to 50ºC
- Needle temperature: ambient to 60ºC.
- Electro-spinning voltage: 25 kV
- Nozzle diameter for hydrogels: 14 G-27 G Luer Lock
- Nozzle diameter for electrospinning: 14 G-30 G Luer Lock
The material must be provided by the customer. Request price for optimisation parameters.
Options and prices chart
Options |
Unit |
Public Sector |
Other customers |
Prototipado por hidrogel |
€ / hora
|
29.17 € |
34.72 € |
Prototipado con termoplástico por filamento |
€ / hora
|
30.05 € |
35.78 € |
Prototipado por electrohilado |
€ / hora
|
24.16 € |
28.76 € |
Prototipado con termoplástico por granza |
€ / hora
|
34.43 € |
40.99 € |